How to Check Tire Tread Depth

How to Check Tire Tread Depth D'Iberville MS

Tires usually have a recommended six-year lifespan. However, there are several factors that could cause them to wear out before they reach that mark. It all depends on how often you rotate your tires, as well as what kind of roads you drive on in your travels through D’Iberville, Gulfport, and Hattiesburg.

Checking the tread depth is one of the best ways to tell if you’re due for a tire replacement. The question is: what’s the best way to do it? Lucky for you, our team here at Pat Peck Kia has put together this guide on how to go about checking tire tread depth.

Why It’s Important to Check Tread Depth

Mechanic Checking Tire Tread D'Iberville MSTires are an essential part of your vehicle. Especially when you consider the fact that they are the only component that actually touches the road. They are, first and foremost, essential to your safety out on the road. It’s the tire’s job to grip the road, and this is especially important in wet and slippery conditions. However, when there is not enough tread depth, it can become increasingly difficult for your tires to gain traction.

Having worn out tires will also put an irregular amount of stress on the other parts of your vehicle. This will not only lead to a car that underperforms, but it may also lead to a decrease in its overall lifespan.

Fortunately, if you have some spare change, checking the depth of your tire tread is a fairly simple task.

Proper Tread Depth

Good tires will have 4/32 inches or more of tread depth. Once the depth reaches 3/32 inches, it’s a good idea to start preparing for a replacement. When your tires have less than 2/32 inches of tread depth, they are no longer effectively doing their job. Now, you’re probably wondering how you go about getting these measurements.

Not only was Honest Abe the sixteenth president of our United States, he has also been helping millions of Americans check the quality of their tires for years. He’s been able to accomplish this by being the centerpiece of an ingenious DIY evaluation of tire tread depth.

The Penny Test and its Alternatives

The Penny Test for Tire Treads D'Iberville MSFirst, find yourself a penny. Then, flip Lincoln upside down and put his head right into the tread of your tire. If you can see the top of his head, you have less than 2/32 inches of tread depth. It’s time to replace your tires.

If you don’t have a penny, a quarter will also work. Follow the same procedure, and if the tire tread touches Washington’s head, you have at least 4/32 inches of tread left. That means you’re still good to go!

What happens if you don’t have any spare change? Fortunately, most tires have a built-in treadwear indicator. You can find these bars at the bottom of the tread grooves in several locations around the tire. Look for the bars to be visibly flush with the adjacent treads. If they are, it’s time to replace your tires.

Is it Time to Replace Your Tires?

If you’re a driver in D’Iberville, Gulfport, or Hattiesburg, and your tires failed the penny test, bring your vehicle over to Pat Peck Kia. We offer some of the top brands and expert installation. So, when you get back out on the road, you’ll have peace of mind.

If you’re still unsure about the tread wear of your tires, feel free to stop by. Our technicians will evaluate your tires and let you know what the next move should be. Schedule a service appointment today!

Contact Us

We would love to hear from you! Please fill out this form and we will get in touch with you shortly.
  • This field is for validation purposes and should be left unchanged.